Elastomeric Load Bearing Pads With PTFE
Vibsorb Elastomeric ROF Bearing pads are in stock and available for expedited processing and shipping!
Call 800-580-4195 for more information
Vibsorb ROF Elastomeric Pad with PTFE
Vibsorb ROF load Bearing Pads are made of fully cured masticated fiber reinforced rubber made from a proprietary blend of virgin and recycled rubbers. During the manufacturing process, synthetic fibers are added to the base rubber compounds to create an internal stiffening - much like reinforced concrete. This mesh structure delivers enhanced tensile, compressive strength, stiffness, tear resistance, durability, and superior ozone and weather resistance.
VIBSORB ROF Elastomeric Pad Mechanical Properties
Properties Tested
ASTM Test Method
Value
Hardness Shore "A"
ASTM D2240
80 +- 10
Tensile Strength
ASTM D412
Machine Direction: 951 PSI
Tensile Strength
ASTM D412
Machine Direction: 951 PSI min
Elongation (%)
ASTM D412
Machine Direction: 15% min
Tear Strength (lbs/in)
ASTM D624
Machine Direction: 200 min
Low Temperature Resistance @ -40C
D1894
PASS
Heat Aging
D573
70 hrs @70C, Changed:
Hardness +- 10 points
Tensile =- 25% max
Elongation =- 25% max
Ultimate Compressive Strength
8,000 PSI
Benchmark accepts no responsibility for individual results obtained. Everyone is strongly recommended to verify data and obtain their own independent test results. This data is subject to change without notice.
Vibsorb Elastomeric ROF pad is available in the following thickness 1/4", 1/2", 3/4", 1" and 2". Additional thickness and custom fabrication is available upon request.
Benchmark stocks elastomeric bearing pad material the following dimensions in Canada:
Elastomeric Pad Thickness
Sheet Dimensions
Roll Dimensions
1/4" (6.35mm)
1/2" (12.7mm)
3/4" (19mm)
1" (25.4mm)
2" (50.8mm)
48" (1219mm) x 60"(1524mm)
48" (1219mm) x 60"(1524mm)
48" (1219mm) x 60"(1524mm)
48" (1219mm) x 60"(1524mm)
48" (1219mm) x 60"(1524mm)
48" (1219mm) x 300' (91.5 meter)
48" (1219mm) x 75' (22.86 meter)
N/A
N/A
N/A
Vibsorb Elastomeric ROF Pads are also available in cut to size pieces including holes, slots and other finishing requests. Benchmark also stocks the engineer approved epoxy system for bonding Vibsorb to a variety of surfaces including concrete, steel, PTFE and composite materials.