Benchmark is proud to offer the following comparison between Benchmark STB-1 Structural Thermal Break, Fabreeka TIM and SCHOECK!
Benchmark Structural Thermal Break STB-1 Engineer approved is in stock and available for delivery in 5 - 7 days!
Benchmark STB-1 Structural Thermal Break
Compared to
Fabreeka TIM Structural Thermal Break
Compared to
SCHOECK ISOKORB
- Compressive Strength: 48,000 PSA
- Compressive Modulus: 400,670
- Thermal Conductivity: 1.71 BTU IN / HR / SF
- Thermal Resistance (R value): .90
- Shear Strength: 15,000 PSI
- Tensile Strength: 11,000 PSA
- Flexural Strength: 25,000 PSI
- STB-1 Structural Thermal Break is a Benchmark product
- Benchmark has stock in Canada typical lead time is 5 - 7 days, expedited service is available
- Compressive Strength: 48,000 PSA
- Compressive Modulus: 400,670
- Thermal Conductivity: 1.71 BTU IN / HR / SF
- Thermal Resistance (R value): .90
- Shear Strength: 15,000 PSI
- Tensile Strength: 11,000 PSA
- Flexural Strength: 25,000 PSI
- Fabreeka TIM is a Fabreeka product
- Thermal Conductivity: .7 BTU IN / HR / SF
- Schoeck Isokorb is a Schoeck product
- Stock in Europe
In stock and fabricated in Canada, Benchmark brand STB-1 engineer approved equivalent is in stock and available for fast shipping!
All above specifications are meant to be used for basic comparison and information purposes only. Please verify with the above manufacturers directly.
In order to have been selected for this list the above mentioned products would be considered to be of the highest quality. When engineers specify vibration control or thermal break products or brands they generally add the "or approved equivalent" option. Typically lead time and pricing become determining factors once the engineer on record has verified the selected product meets the design criteria.
Benchmark makes no further representations.
The above comparison table is meant to assist with identifying additional approved alternative products. For more detailed and verified specifications please contact the respective above manufacturers directly.
For Vibsorb MIL C 882, PTFE, Slide Bearings, Elastomeric Bearings / STB-1 Structural Thermal Break availability, pricing, detailed datasheets, engineer approved equivalent questions or design packages please contact Benchmark today or fill out the information request form below. For all other products listed above please contact the respective manufacturers or distributors directly!
Structural Thermal Break Canada TIM (Thermal Insulating Material) is a high density, closed cell rigid polyurethane foam used as an effective thermal break for a variety of applications, such as column base thermal isolation for roof equipment, cold storage facilities or to reduce thermal bridging between a roof and outdoor space. It also provides column base thermal insulation and is manufactured in several densities to support a range of load conditions.
The unique properties of Structural Thermal Break Canada TIM (Thermal Insulating Material) make it impermeable by any type of liquid, including water and most solvents, thus suited for moisture, severe weather conditions or harsh environments. With additional qualities as a structural thermal isolation block, it is resistant to mechanical stress and has exceptional insulating qualities, which makes it a valuable asset to reduce thermal bridging in non-moment building envelope connections and cold storage applications.
KEY FEATURES/BENEFITS
- Made in North America
- Exceptional insulating qualities
- Cost effective solution for low load structural connections
- Three densities to meet different load conditions
- Thicknesses range from 1/2” 6″ in solid pieces no bonding required
- Creep resistant – resists deformation under load over time
- Closed cell material is impervious to water and other liquids