Benchmark is proud to offer the following comparison between Fabreeka and the MIL C 882 approved equivalent!
Benchmark MIL C 882 Vibration Control Pad
Â
Compared to
Fabreeka Vibration Control Pad
- Meets or exceeds MIL-C-882 and MIL-E-5272 specifications
- Accommodates compressive loads up to 10,000 psi
- Creep is limited to approximately 5% of the original pad thickness
- Damping rate of 14% of critical
- Impermeable to most oils and the effects of steam, water, mildew and brine
- Effective temperature range is -65°F to 200°F
- Stock in the CANADA (typical lead time is 7 - 10 days)
- Meets or exceeds MIL-C-882 and MIL-E-5272 specifications
- Accommodates compressive loads up to 10,000 psi
- Creep is limited to approximately 5% of the original pad thickness
- Damping rate of 14% of critical
- Impermeable to most oils and the effects of steam, water, mildew and brine
- Effective temperature range is -65°F to 200°F
- Stock in the USA (LONGER lead times may vary between 1 day and 12 weeks)
The Made in America and processed in Canada, Benchmark brand MIL C 882 engineer approved equivalent is in stock and available for fast shipping!
MIL C 882 Isolation Washers for Vibration Isolation
We proudly sell the full line of vibration and thermal break products across Canada. If you are looking for genuine engineer approved and in stock vibration control products in Canada look no further. Contact us today 800 580 4195 for a no obligation free quote.
Isolation washers and bushings are used to eliminate metal-to-metal contact and break the vibration or shock transmission path. For example, the contact between a machine base and an anchor bolt as shown.
Isolation Washers & Vibration Control Bushings are typically used in conjunction with vibration pads or VIBSORB MILÂ C 882 pads where the reduction of impact shock or isolation of transmitted vibration is required.
Key Features/Benefits
- Isolation washers made from MIL C 882 pad material can ultimately withstand loads up to 12,000 psi when used for “uplift” or rebound shock.
- Isolation washers and bushings complete the isolation solution by eliminating the vibration and shock transmission path.
- Washers can be die cut to any outside/inside diameter to fit your application.
Technical Specifications:
Isolation washers are manufactured to interface with standard bolt/washer sizes from 3/16″ to 3″.
Please feel free to contact us today to discuss your project requirements and schedule a commitment free lunch and learn or webinar with one of our product specialists.
Vibration Isolation Washers for Vibration Isolation
We proudly sell the full line of MIL C 882 vibration and thermal break products across Canada and the United States. If you are looking for genuine Anti Vibration products in Canada look no further. Contact us today 800 580 4195 for a no obligation free quote.
Isolation washers and ANTI VIBRATION VIBSORB bushings are used to eliminate metal-to-metal contact and break the vibration or shock transmission path. For example, the contact between a machine base and an anchor bolt as shown.
Isolation Washers & Vibration Control Bushings are typically used in conjunction with Vibration MIL C 882 pads or VIBSORB pads where the reduction of impact shock or isolation of transmitted vibration is required.
Key Features/Benefits
- Isolation washers made from Fabreeka pad material can ultimately withstand loads up to 12,000 psi when used for “uplift” or rebound shock.
- Isolation washers and bushings complete the isolation solution by eliminating the vibration and shock transmission path.
- Washers can be die cut to any outside/inside diameter to fit your application.
Technical Specifications:
Isolation washers are manufactured to interface with standard bolt/washer sizes from 3/16″ to 3″.
Please feel free to contact us today to discuss your project requirements and schedule a commitment free lunch and learn or webinar with one of our product specialists.
Vibration Pad Canada request form