Fabreeka & fabcel material for OEM FAQ’s

Fabreeka & fabcel material for OEM FAQ’s

fabcel oem parts Fabreeka

fabcel oem parts Fabreeka

FAQ

Can Fabreeka pad be supplied in the geometry I need for my application?
Yes, the product can be configured to most geometric shapes.

What do you recommend for cutting Fabreeka/Fabcel pad material in the field?
Fabreeka pad can be cut by using a band saw with a fine-tooth, narrow-angle saw blade configuration. Fabcel pad can be cut using scissors or a fine tooth saw blade. Holes can be cut using a fine tooth, narrow-angle hole saw.

What adhesive do you recommend to bond Fabreeka/Fabcel pad?
#700 Epoxy is recommended for Fabreeka pad.
2240-05 Cyanoacrylate is recommended for Fabcel pad.

What are the manufacturing tolerances of Fabreeka/Fabcel pad?
Manufacturing tolerances vary by thickness, part geometry, and material. Please contact Fabreeka’s Engineering department at 1-800-322-7352 or [email protected] to discuss the tolerances for your application.

What is the coefficient of friction of Fabreeka pad on steel
Using an average of 1,000 psi, and depending on load, the coefficient of friction of Fabreeka pad on steel is 0.4 and the coefficient of friction of Fabreeka-PTFE on steel is 0.006.

For more information on this and other services call Benchmark Group 800 580 4195 today!

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: